Elite FT Training Video Part 2

This forum is for HTP's Elite FT product line.

Moderator: Jason.Alpert

Elite FT Training Video Part 2

Postby HTP » Thu Jan 05, 2012 12:09 am

Elite FT Training Video Part 2

CEO of HTP, Dave Davis explains the ins and outs of the new Elite FT boiler. This video covers the following topics:
    - Removing the Control System
    - Removing the Fan Assembly
    - Overview of the Burner
    - Examining the Flue Design
    - A Closer Look at the Gas Valve
    - Boiler Piping Review
    - Overview of the Features

User avatar
Site Admin
Posts: 186
Joined: Thu Dec 18, 2008 4:45 pm
Location: Massachusetts, USA

Re: Elite FT Training Video Part 2

Postby 88GTA » Wed Mar 14, 2012 1:06 am

Just watched both videos and the boiler looks great, but I have a few questions.
Does this boiler need yearly cleaning like the Munchkin (which I have installed some)?
How do you clean the burner tubes?
Can you do maintenance with taking apart the whole boiler?
Can you access the safety switches on the flue without taking anything apart?
Do you have to drain the boiler when taking boiler apart?
Posts: 5
Joined: Wed Nov 16, 2011 1:23 am

Re: Elite FT Training Video Part 2

Postby john partridge » Mon Mar 19, 2012 1:09 pm

Yearly cleaning is recommended.
The burner tubes can be cleaned by blowing air with a compressor insuring good flow. http://www.htproducts.com/literature/lp-387.pdf. go to page 79
Yes you do need to take some things apart to do maintenance
All safety switches are accessible without taking anything apart .
You do need to drain the boiler to take the heat exchanger out. But for the most part there is no need to drain the boiler
Hope this helps
john partridge

Return to Elite FT

Who is online

Users browsing this forum: No registered users and 1 guest