Page 1 of 1

installtion question

PostPosted: Mon May 06, 2013 10:08 pm
by 88GTA
I'm going to be installing an Elite plus this week. I intend on using a 30 gallon boiler buddy buffer tank that I have, with a taco rmb and one "I" valve to reduce the water temps for three different applications.
Can you give me a drawing that is perfered and what type of control goes into the Boiler Buddy the run the circulators before the boiler turns on. I would like to use the heat in the BB before the boiler turns on or will the sensor in the boiler work with the BB on ODR?
Hope that makes sense.