Page 1 of 1

F00 - WATER HIGH TEMP

PostPosted: Thu May 24, 2012 10:59 pm
by HTP
Fault Code F00 - WATER HIGH TEMP

This display indicates if the water in the boiler has overheated. This code indicates a serious safety issue and the boiler will not restart until it cools sufficiently and a technician repairs the cause of overheating and pushes the RESET button on the display. This is a serious situation and is indicated by the red light on the display illuminating and the word LOCKOUT flashing on the display. During this lockout fault, the pump will be on as indicated on the second line in an effort to cool the boiler down.