Connect by laptop to Munchkin M140

Moderator: Jason.Alpert

Connect by laptop to Munchkin M140

Postby dmacmail210 » Fri May 04, 2012 8:12 pm

Hi Jason,
I'm of the belief that the connection to the control module of a Munchkin M140 installed in 2008 and connects to the serial port of a laptop is enough to give you specs on operation. Can you elaborate on any steps that might be taken inorder for this connection to occur.

Dave M

Re: Connect by laptop to Munchkin M140

Postby Jason.Alpert » Fri May 04, 2012 10:10 pm

Dave -

Thanks for the question. There are two pieces that you need to be able to connect a computer to a Munchkin.

1. The connection cable. We have this available with a serial and a USB cable connection. I would recommend that you order the USB version as it is the serial version with a USB adapter giving you the most options for connecting. It is HTP part number 7250P-738

2. The software. We currently have a tool called HTP Programmer which allows you to view the status and fault history of the connected unit along with reviewing much more information. To get the software, please contact HTP Technical Support or your local Representative.

I hope this helps.

- Jason
Jason Alpert
Manager of Customer & Technical Services

User avatar
Posts: 19
Joined: Tue Sep 13, 2011 10:51 pm
Location: Massachusetts, USA

Return to ModBus Adapter

Who is online

Users browsing this forum: No registered users and 0 guests