|
The Vision 3 is the first totally integrated multiple boiler
management control that can actually communicate with anywhere from one
to eight modulating Munchkin Boilers. Vision contractors can now take
Multiple Munchkin Boilers and seamlessly operate them as if they were
one large boiler. The Vision 3 is very simple to install and operate.
Only Vision Contractors can install the Vision 3 with the use of a Vision
Pass Code. This gives you the assurance that your Vision System was installed
properly and professionally.
System Features
- Software is available to monitor system history, parameters, fault history and run time of the Munchkin Boiler.
- LED Lights provide a visual system displaying: Heat Operation, Extra Boiler Output, Primary
Circulator Function and Auxiliary Fan.
- The Vision 3 can be connected to a building management system that
supplies a 0-10 volt signal to control the operational set point of
the connected boilers.
- The Vision 3 system has the ability of using an existing conventional
boiler as an additional heat source, should the connected Munchkin Boilers
exceed 95% of their operation.
- Automatic boiler rotation
- Central heating indirect limit setting
- Temperature set point and differential adjustment for both central heating and indirect heating
- Indirect priority functions
- Post purge circulator functions
- Personalized outdoor reset curve
- Two circuit temperature capability
- High temperature for the indirect or fan coil
- Low temperature for Radiant Heat
- Warm weather shut down
- The Vision 3 has four boiler and eight boiler capability.
|
